Armitage Shanks Toilet Basins

Toilet basins come in different colors, styles and prices. However, toilet basin efficiency has nothing to do with any of those aspects. Today the Federal government is stipulating that newly built toilet basins must only use no more than 1.6 liter of water per flush. Today, many Armitage Shanks toilet basins are made to create enough flushing power without requiring too much water. This rule is applicable to all parts of the United States and to other parts of the world.

The flush system

An average toilet basin uses around 3 to 7 gallons of water and that level of consumption of water is undeniably high. A gravity flush system uses water weight to create enough pressure that prevents clog, and rinses the toilet basin after each use. However, with this system, water plays a huge role; without too much of it the entire system is not going to work properly. When the pressure flush system was invented, it made a significant change on how toilet bowl manufacturers created their products. This system uses electricity to operate but with just the minimal consumption of energy that is required to just create enough pressure and very little water.

Modern toilet basin construction from Armitage Shanks toilet basins and other manufacturers

Toilet basins are usually made up of two parts: the tank and the bowl. A one-piece toilet, also known as a low profile toilet, merges the basin and the tank into one single unit. The two-piece model on the other hand is cheaper, but the one-piece unit is way easier to maintain. This is because there are no crevices between the basin and the tank, where dirt and debris may form and hide. Most of these types are also wall mounted and can be very hard to find. But Armitage Shanks toilet basins come in varying types.

The construction of Armitage Shanks toilet basins can also be elongated or round. Elongated ones are 2 inches longer in the front and have a larger water surface. They could be made from wood, polypropylene or plastic. Some people prefer cushioning their toilet bowls, whilst others buy the heated type, generally to increase the comfort level of their Armitage Shanks toilet basins. Modern ones automatically flush without command; you just have to close the top.

Toilet basin shopping guide

When shopping for toilet basins, it is important that you focus your attention on three main things:

• The flush system
• The size of the trap
• The rough-in measurement

Toilet basins clog primarily because of the size of the trap. The flush valve, located at the base of the tan that regulates the water flow into the bowl, should be of the highest quality. A good rule of thumb is the larger the better, because waste can easily pass through larger traps. However, to prevent the smell from coming back into the room the trap should be of the appropriate type.

The rough-in, on the other hand, is the distance between your wall and the center of the toilet drain. Typically, the distance is 12 inches, but you find some that are between 10 and 14 inches. Functionality wise it is better to stick to higher measurements.